Cam Sprocket
Cam SprocketRemoval
1. Remove the V-belts.
2. Remove the crank pulley.
3. Remove the timing belt cover.
4. Remove the timing belt.
5. Remove the camshaft position sensor.
6. Remove the cam sprocket No. 2. To lock the camshaft, use ST.
ST 18231AA010 CAM SPROCKET WRENCH
NOTE: CAM SPROCKET WRENCH (499207100) can also be used.
7. Remove the cam sprocket No. 1. To lock the camshaft, use ST.
ST 499207400 CAM SPROCKET WRENCH
Installation
1. Install the cam sprocket No. 1. To lock the camshaft, use ST.
ST 499207400 CAM SPROCKET WRENCH
Tightening torque: 78 Nm (8.0 kgf-m, 57.9 ft. lbs.)
NOTE: Do not confuse left and right side cam sprockets during installation. Identify by indication of L or R.
2. Install the cam sprocket No. 2. To lock the camshaft, use ST.
ST 18231AA010 CAM SPROCKET WRENCH
NOTE: CAM SPROCKET WRENCH (499207100) can also be used.
Tightening torque: 78 Nm (8.0 kgf-m, 57.9 ft. lbs.)
3. Install the camshaft position sensor.
4. Install the timing belt.
5. Install the timing belt cover.
6. Install the crank pulley.
7. Install the V-belts.
Inspection
1. Check the cam sprocket teeth for abnormal wear and scratches.
2. Make sure there is no free play between cam sprocket and key.
3. Check the cam sprocket protrusion used for sensor for damage and contamination of foreign matter.