Brake Light Switch: Testing and Inspection
BRAKE LIGHT SWITCHINSPECTION
1. If the stop light switch does not operate properly (or if it does not stop at the specified position), replace with a new one.
Specified position L: 2 mm (0.079 inch)
2. Measure the clearance between threaded end of stop light switch and stopper.
CAUTION: Be careful not to rotate stop light switch.
Stop light switch clearance 0.3 mm (0.012 inch)
3. If it is not within specified value, adjust it by adjusting position of stop light switch.
CAUTION: Be careful not to rotate the stop light switch.