Fuel Injector: Service and Repair

Intake Manifold (Part 1):

Intake Manifold (Part 2):

Fuel Injector

REMOVAL

RH SIDE

1. Release the fuel pressure.
2. Disconnect the ground cable from battery.
3. Open the fuel filler flap lid, and remove the fuel filler cap.
4. Remove the air intake chamber and air cleaner case.
5. Remove the power steering pump and tank.
1. Remove the front side V-belt.




2. Remove the bolts which hold the power steering pipes onto the intake manifold protector RH.

NOTE: Do not disconnect the power steering hose.




3. Remove the bolts which install the power steering pump to the bracket.




4. Disconnect the power steering pump switch connector (A).




5. Remove the reservoir tank from the bracket by pulling it upwards.




6. Place the power steering pump and tank on the right side wheel apron.

6. Remove the spark plug cords from spark plugs (#1 and #3 cylinders).




7. Remove the fuel pipe protector RH.
8. Disconnect the connector (A) from fuel injector.




9. Remove the harness band (B) which holds engine harness to fuel injector pipe.




10. Remove the bolts which hold fuel injector pipe onto intake manifold.
11. Remove the fuel injector while lifting up the fuel injector pipe.

LH SIDE

1. Release the fuel pressure.
2. Remove the battery.
3. Open the fuel filler flap lid, and remove the fuel filler cap.
4. Remove the spark plug cords from spark plugs (#2 and #4 cylinders).




5. Remove the fuel pipe protector LH.
6. Disconnect the connector (A) from fuel injector.




7. Remove the harness band (B) which holds engine harness to fuel injector pipe.







8. Remove the bolts which hold fuel injector pipe onto intake manifold.

9. Remove the fuel injector while lifting up the fuel injector pipe.

INSTALLATION










RH SIDE
Install in the reverse order of removal.

NOTE: Use new O-rings.













2. LH SIDE
Install in the reverse order of removal.

NOTE: Use new O-rings.