Front Axle Disassembly
DISASSEMBLYEXCEPT STI MODEL
1) Using the ST1, support the housing and hub securely.
2) Attach the ST2 to housing and drive the hub out.
ST1 927060000 HUB REMOVER
ST2 927080000 HUB STAND
If the inner bearing race remains in hub, remove it with a suitable tool (commercially available).
NOTE:
Be careful not to scratch the polished area of hub.
CAUTION:
Do not reuse the bearing if the hub was removed.
3) Remove the disc cover from housing.
4) Using a standard screwdriver, remove the outer and inner oil seals.
5) Using a flat tip screwdriver, remove the snap ring.
NOTE:
Be careful not to damage the housing at removal.
6) Using the ST1, support the housing securely.
7) Using the ST2, hold the inner race to drive out the outer race of bearing.
ST1 927400000 HOUSING STAND
ST2 927100000 BEARING PULLER
8) Using the ST and a hydraulic press, drive the hub bolts out.
ST 927080000 HUB STAND
