Rear Regulator and Motor Assembly
REAR REGULATOR AND MOTOR ASSEMBLYREMOVAL
1. Remove the rear door glass.
2. Remove the front sash.
3. Disconnect the motor connector.
4. Remove the four bolts and two nuts to remove regulator assembly.
5. Remove the screws to remove motor assembly.
INSTALLATION
1. Install in the reverse order of removal.
2. Adjust the rear door glass.
Tightening torque: Nm (kgf-m, ft-lb)
T1: 7.4 (0.75, 5.5)
T2: 13.7 (1.4, 10.1)