Removal and Installation

WASHER TANK AND MOTOR

REMOVAL
1. Open the hood.
2. Disconnect the ground cable from battery.
3. Remove the front bumper.




4. Remove the hose from L joint, and then drain washer fluid.




5. Remove the duct clip.




6. Remove the connector.




7. Remove the screw, and then remove the cover.




8. Disconnect the hose.




9. Remove the bolt and nut, and then remove the washer tank.

INSTALLATION
Install in the reverse order of removal.

Tightening torque: 6.0 N-m (0.61 kgf-m, 4.4 ft-lb)