P0140
DTC P0140 O2 SENSOR CIRCUIT NO ACTIVITY DETECTED (BANK 1 SENSOR 2)1. OUTLINE OF DIAGNOSIS
Detect abnormalities in the rear oxygen sensor output property.
By referring to the intake air amount, engine coolant temperature, main feedback control, deceleration fuel cut and other operating conditions, if the rear oxygen sensor voltage should be moving under those conditions but is showing a low voltage, this is judged as a Low side NG. If the voltage is high, it is judged as a High side NG.
When either Low side or High side is NG, this is judged as an rear oxygen sensor property NG.
2. ENABLE CONDITION
Enable Conditions:
3. GENERAL DRIVING CYCLE
Perform the diagnosis only once after engine warm-up.
4. DIAGNOSTIC METHOD
Abnormality Judgment
When the following conditions are established, it is NG.
Time Needed for Diagnosis: 200 seconds
Malfunction Indicator Light Illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.
Normality Judgment
When the following conditions are established, it is OK.
5. DTC CLEAR CONDITION
- When the OK idling cycle is completed 40 times in a row
- When "Clear Memory" is performed
6. MALFUNCTION INDICATOR LIGHT CLEAR CONDITION
- When the OK driving cycle is completed 3 times in a row
- When "Clear Memory" is performed
7. FAIL SAFE
None
8. ECM OPERATION AT DTC SETTING
- Memorize the freeze frame data. (For test mode $02)
- Memorize the diagnostic value and trouble standard value. (For test mode $06)