Brakes and Traction Control: Service Precautions
CAUTION^ Wear appropriate work clothing, including a cap, protective goggles and protective shoes when performing any work.
^ Remove contamination including dirt and corrosion before removal, installation or disassembly.
^ Keep the disassembled parts in order and protect them from dust and dirt.
^ Before removal, installation or disassembly, be sure to clarify the failure. Avoid unnecessary removal, installation, disassembly and replacement.
^ Vehicle components are extremely hot after driving. Be wary of receiving burns from heated parts.
^ Use SUBARU genuine fluid, grease etc. or equivalent. Do not mix fluid, grease, etc. of different grades or manufacturers.
^ Be sure to tighten fasteners including bolts and nuts to the specified torque.
^ Place shop jacks or rigid racks at the specified points.
^ Apply grease onto sliding or revolving surfaces before installation.
^ Before installing O-rings or snap rings, apply sufficient amount of fluid to avoid damage and deformation.
^ Before securing a part on a vise, set cushioning material such as wood blocks, aluminum plate, or shop cloth between the part and the vise.
^ Keep fluids away from the vehicle body. If any fluid contacts the vehicle body, immediately flush the area with water.