Timing Belt Cover
Timing Belt CoverREMOVAL
NOTE: Perform the work with the engine installed to body when replacing a single part.
1) Remove the V-belts.
2) Remove the crank pulley.
3) Remove the timing belt cover (LH) (A).
4) Remove the timing belt cover (RH) (B).
5) Remove the front timing belt cover (C).
INSTALLATION
1) Install the front timing belt cover (C).
Tightening torque: 5 N-m (0.5 kgf-m, 3.7 ft-lb)
2) Install the timing belt cover (RH) (B).
Tightening torque: 5 N-m (0.5 kgf-m, 3.7 ft-lb)
3) Install the timing belt cover (LH) (A).
Tightening torque: 5 N-m (0.5 kgf-m, 3.7 ft-lb)
4) Install the crank pulley.
5) Install the V-belts.
INSPECTION
Check the cover for damage.