Fog/Driving Lamp: Adjustments
Front Fog Light AssemblyADJUSTMENT
Fog light aiming
NOTE: Before checking the fog light beam level, be sure of the following:
- The area around the fog light does not have any scratch, damage or other type of deformation.
- Vehicle is parked on a level surface.
- The inflation pressure of tires is correct.
- Vehicle's fuel tank is full.
1. Bounce the vehicle several times to normalize the suspension.
2. Make certain that someone is seated in the driver's seat.
3. Measure the height of fog light center.
4. Disengage the three clips, and then turn over the mud guard.
5. Adjust the front fog light pattern by inserting a Phillips screwdriver to the adjusting hole.
