Air Cleaner Housing: Service and Repair

Air Cleaner Case

REMOVAL
1. Disconnect the ground cable from the battery.






2. Disconnect the connector from mass air flow and intake air temperature sensor.






3. Loosen the clamps (A) which connect the air intake boot and the intake duct.
4. Remove the clip (B) from air cleaner upper cover.






5. Remove the air cleaner upper cover.
6. Remove the air cleaner element.
7. Remove the air cleaner lower case.






INSTALLATION
Install in the reverse order of removal.






NOTE: Before installing the air cleaner upper cover, align the protrusion with the hole of air cleaner lower case, and then secure the upper cover and lower case.