Oil Pressure Sender: Service and Repair

Oil Pressure Switch

REMOVAL
1) Remove the collector cover. (Turbo model)
2) Remove the generator from bracket.
3) Disconnect the terminal from oil pressure switch.





4) Remove the oil pressure switch.





INSTALLATION
1) Apply liquid gasket to the oil pressure switch threads.
Liquid gasket: THREE BOND 1324 (Part No. 004403042) or equivalent





2) Install the oil pressure switch onto cylinder block.
Tightening torque: 25 N-m (2.5 kgf-m, 18.4 ft-lb)





3) Connect the terminal to the oil pressure switch.





4) Install the generator to bracket.
5) Install the collector cover. (Turbo model)

INSPECTION
Check the oil pressure switch installation portion for oil leakage and oil seepage.