Removal and Replacement

Generator

REMOVAL
1. Disconnect the ground cable from the battery.






2. Remove the collector cover. (Turbo model)
3. Disconnect the connector and terminal from generator.

- Non-turbo model






- Turbo model






4. Remove the V-belt covers. (Non-turbo model)
5. Remove the front side belts.
6. Remove the bolts which install the bracket to remove the generator.






INSTALLATION
Install in the reverse order of removal.

Tightening torque: 25 N.m (2.5 kgf.m, 18.4 ft.lb)

CAUTION: Check and adjust the V-belt tension.