Steering/Suspension - Front Stabilizer Bar Rubbing Noise

NUMBER: 05-42-08

DATE: 11/24/08

APPLICABILITY:
2003-2008MY Forester

SUBJECT:
Front Stabilizer Bar Bushings

Introduction

If you encounter a rubbing type noise coming from the front stabilizer bar, especially at low ambient temperatures, the stabilizer bar bushings may need to be replaced. A modification was made using a different material that is more durable which will eliminate the noise.





PART INFORMATION





PART IDENTIFICATION

Repair Procedure/Information

Refer to the applicable Service Manual for replacement procedure.

Make sure stabilizer bar surface is clean prior to installing new bushing.

When installing new style, both sides should be replaced at the same time.

Warranty/Claim Information

For vehicles within the Basic New Car Limited Warranty period, refer to the Warranty Wizard(TM) for claim information.