Neutral Switch Input Circuit High (MT Model)

DTC P0852 NEUTRAL SWITCH INPUT CIRCUIT HIGH (MT MODEL)

1. OUTLINE OF DIAGNOSIS
Detect the open or short circuit of neutral SW.

Judge as NG when there is no change in the neutral SW even if the driving shift was applied. (There is neutral SW ON/OFF inversion from the vehicle speed and engine speed.)

2. ENABLE CONDITION

Enable Conditions:

3. GENERAL DRIVING CYCLE
Perform the diagnosis continuously after two seconds have passed since the engine started.

4. DIAGNOSTIC METHOD

- Abnormality Judgment
Judge NG when the malfunction criteria below are completed determined times or more after the neutral SW change.






Time Needed for Diagnosis: 3 time

Malfunction Indicator Light Illumination: Illuminates when malfunction occurs in 2 continuous driving cycles.

- Normality Judgment
Judge as OK and clear NG when there is change in the neutral SW.






Time Needed for Diagnosis: Less than 1 second

5. DTC CLEAR CONDITION
- When the OK idling cycle is completed 40 times in a row
- When "Clear Memory" is performed

6. MALFUNCTION INDICATOR LIGHT CLEAR CONDITIONS
- When the OK driving cycle is completed 3 times in a row
- When "Clear Memory" is performed

7. FAIL SAFE
Control of cruise control: Control prohibited

8. ECM OPERATION AT DTC SETTING
Memorize the freeze frame data. (For test mode $02)