Remote Openers

Remote Openers

REMOVAL

1. FRONT HOOD OPENER
1. Remove the hood lock assembly.
2. Remove the release cable from hood lock.
3. Remove the bolt, and then detach the opener lever.






2. FUEL FLAP OPENER
1. Remove the rear seat.
2. Remove the center pillar lower trim, and side sill cover of front and rear. Remove the rear pillar lower trim. Remove the floor mat.
3. Remove the rear quarter trim RH. Remove the clip holding cable (A).
4. Remove the bolt, and then detach the opener pull handle (B).
5. Remove the cable (A) from opener pull handle (B).






6. Rotate the fuel lock inside the quarter panel to the left and remove.






INSTALLATION
Install in the reverse order of removal.

Tightening torque: 7.5 N.m (0.76 kgf.m, 5.5 ft.lb)