Front Fender: Service and Repair

FRONT FENDER

REMOVAL

1. Disconnect the ground cable from the battery.
2. Remove the front bumper face.
3. Remove the mud guard.
4. Remove the side sill spoilers.
5. Remove the side protector.
6. Loosen the bolts and clips to remove the front fender panel.

INSTALLATION

1. Install in the reverse order of removal.
2. When the front fender panel is installed, the clearance between front fender panel and front hood panel must be equal.

Tightening torque: 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)