Sub Frame

Sub Frame

REMOVAL
1) Lift up the vehicle.
2) Remove the under cover.
3) Remove the bolt cover.





4) Remove the clip.





5) Remove the sub frame.

NOTE: Loosen bolt (1) and leave a few threads caught, then remove the bolts in the order of (2), (3), (4), (5), and (6).





INSTALLATION
Install in the reverse order of removal.

NOTE: Replace with a new M12 bolt.

Tightening torque:
T1: 55 N-m (5.6 kgf-m, 41 ft-lb)
T2: 71 N-m (7.2 kgf-m, 52 ft-lb)





INSPECTION
1) Check that there is no damage or distortion of the sub frame.
2) Check that the bolts are tightened with the specified torque. If there is looseness, tighten to the specified torque.
Tightening torque:
T1: 55 N-m (5.6 kgf-m, 41 ft-lb)
T2: 71 N-m (7.2 kgf-m, 52 ft-lb)