> on the Subaru Select Monitor, select {2. Check individual system} --> {7. Keyless unit mode} --> {8. Keyless transmitter ID registration}.
4. Input the 8-digit ID number from the left, which is attached to the plastic bag of the keyless transmitter or to the transmitter inner circuit board, then press the [YES] key.

NOTE: Press the [UP Arrow] key on the Subaru Select Monitor to increase the number, and the [DOWN Arrow] key to decrease. Press the [<] key to move to the digit in the left, and [>] to the right.

5. The ID number you have entered will be shown. Make sure that the ID number shown is the same as the plastic bag.
6. Press the [YES] key if the ID number is correct. If incorrect, press the [NO] key to return to the step 3) and try again.
7. <> is displayed and registration starts.
8. <> will be displayed when the registration process is done.
9. To exit, select <>, and press the [NO] key to return to {8. Keyless transmitter ID registration}. If there are additional keyless transmitters to be registered, select <>, and press the [YES] key to return to the step 3).

NOTE:
- If the registration fails, <> will be shown. Press the [YES] key to return to {8. Transmitter ID registration}. And retry from the step 2).
- <> is shown on the Subaru Select Monitor when fourth keyless transmitter has been registered. Press the [NO] key to return to {8. Keyless transmitter ID registration}.