Component

COMPONENT

Component:

MEMORY UNIT
In addition to storing the current slide/tilt/lifter/reclining positions based on the pulse signals from each motor assembly, registration/call out of preset seat positions is performed by the operation of the memory switch assembly.

The amount of movement for each motor is counted from a reference position, and the counts are recorded by this count. If the counts from the reference position exceeds the limit for some reason, the preset call feature may not operate properly, and initialization will be required in this case.
When a preset seat position is registered or called out, the built-in buzzer will sound.

MEMORY SWITCH ASSEMBLY
- SET button
When the SET button is pressed, the unit will enter the registration preparation status. (If the preset call button is not pressed within 5 seconds, the registration preparation status will be cancelled.)

- Preset call button
- Calls out the registered seat position.
- By pressing the preset call button after pressing the SET button, the seat position is registered.

MOTOR ASSEMBLY
A motor assembly is provided for each function of slide, tilt, lifter, and reclining.

Each motor assembly has a built-in encoder, and sends a pulse signal to the memory unit.