Cylinder Head Assembly: Specifications
Cylinder headSurface warpage limit 0.035 mm (0.0012 in)
Grinding limit 0.1 mm (0.004 in)
Standard height 97.5 mm (3.84 in)
Cylinder head bolts
Tighten all bolts to 29 N-m (3.0 kgf-m, 21.4 ft-lb) in alphabetical sequence.
Tighten all bolts to 69 N-m (7.0 kgf-m, 50.9 ft-lb) in alphabetical sequence.
Loosen all the bolts by 180° in the reverse order of installing, and loosen them further by 180°.
Tighten all bolts to 42 N-m (4.3 kgf-m, 31.0 ft-lb) in alphabetical sequence.
Tighten all bolts by 80 to 90° in alphabetical sequence.
Tighten all bolts by 40 to 45° in alphabetical sequence.
Further tighten the bolts (a) and (b) by 40 - 45°
Camshaft Cap
Temporarily tighten the bolts (a) through (d) in alphabetical sequence
Bolts (a) through (j) in alphabetical sequence 9.75 N-m (1.0 kgf-m, 7.2 ft-lb)
Bolts (k) through (r) in alphabetical sequence 9.75 N-m (1.0 kgf-m, 7.2 ft-lb)
Bolts (s) and (t) in alphabetical sequence 9.75 N-m (1.0 kgf-m, 7.2 ft-lb)
Camshaft Sprocket 78 N-m (8.0 kgf-m, 57.5 ft-lb)