Headlamp: Adjustments
Headlight AssemblyADJUSTMENT
1. HEADLIGHT AIMING
CAUTION: Turn off the light before adjusting the headlight aiming. If it is necessary to inspect the aiming, do not turn on the light for more than two minutes.
NOTE: Before checking the headlight beam level, be sure of the following:
- The area around the headlight does not have any scratch, damage or other type of deformation.
- Vehicle is parked on a level surface.
- The inflation pressure of tires is correct.
- Vehicle s fuel tank is full.
1. Bounce the vehicle several times to normalize the suspension.
2. Make certain that someone is seated in the driver's seat.
3. Measure the distance between the low beam valve centers and the height of the valve center.
4. Cover the headlight that is not being adjusted with a cloth.
5. Turn the headlights on and then adjust the low beam while displaying the beam on the screen.
NOTE: Adjust the vertical beam level (A) first, then horizontal beam level (B) using a screwdriver.
