Fuel Pump: Service and Repair
FUEL TANKFuel Tank (Part 1):
Fuel Tank (Part 2):
Fuel Pump
REMOVAL
WARNING: Place "NO FIRE" signs near the working area.
CAUTION: Be careful not to spill fuel.
NOTE: Fuel pump assembly consists of fuel pump, fuel filter and fuel level sensor.
1. Release the fuel pressure.
2. Disconnect the ground cable from the battery.
3. Remove the luggage floor mat.
4. Remove the service hole cover.
5. Disconnect the connector from fuel pump.
6. Disconnect the quick connector, then disconnect the fuel delivery hose.
7. Move the clips, and disconnect the jet pump hose (A).
8. Remove the nuts which install fuel pump assembly onto fuel tank.
9. Remove the fuel pump assembly from the fuel tank.
INSTALLATION
Install in the reverse order of removal while being careful of the following.
- Make sure the sealing portion is free from fuel or foreign matter before installation.
- Tighten the nuts in alphabetical sequence as shown in the figure to the specified torque.
NOTE: Use a new gasket and retainer.
