Side Airbag Sensor
Side Airbag SensorREMOVAL
1. Turn the ignition switch to OFF.
2. Disconnect the ground cable from battery and wait for at least 20 seconds before starting work.
3. Remove the front outer belt.
4. Detach the side airbag sensor, and then disconnect the airbag connector.
INSTALLATION
CAUTION:
- Do not reuse the bolts and nuts.
- Always use new bolts and nuts.
Install in the reverse order of removal.
Tightening torque:
SRS AIRBAG
Tightening torque: N.m (kgf.m, ft.lb)
T1: 7.5 (0.8, 5.5)
T2: 10 (1.0, 7.2)
T3: 20 (2.0, 14.5)
T4: 25 (2.5, 18.1)