Lateral Link

DISASSEMBLY
1) Check the bushing type by referring to the following table.
2) Select the ST according to the type of bushings used.








3) Using the ST, press the bushing out.





ASSEMBLY
1) Use the same ST as the one used during disassembly.
2) If it is difficult to press the bushing into the lateral link, dilute TIRE LUBE with water and apply it to the inner surface of ST as a lubricant.
Specified lubricant: Tire lube: Water = 1:3
3) Using the ST, press the bushing into place.





4) Press the ST plunger until bushing flange protrudes beyond the lateral link.





5) Turn the lateral link upside down. Press the ST plunger in the direction opposite that outlines in the former procedure until bushing is correctly positioned in lateral link.





INSPECTION
Visually check the lateral link for damage and deformation.