Rear Trailing Link
DISASSEMBLYFRONT BUSHING
Using the ST, press the front bushing out of place.
ST 927720000 INSTALLER & REMOVER SET
REAR BUSHING
1) Remove the housing.
2) Using the ST, press the rear bushing out.
ST 927730000 INSTALLER & REMOVER SET
ASSEMBLY
FRONT BUSHING
Using the ST, press the bushing into the trailing link.
ST 927720000 INSTALLER & REMOVER SET
CAUTION: Turn ST plunger upside down and press it until the plunger end surface contacts the trailing link end surface.
REAR BUSHING
1) Using the ST, press the bushing into the trailing link.
ST 927730000 INSTALLER & REMOVER SET
NOTE: If it is difficult to press the bushing into the trailing link, dilute TIRE LUBE with water and apply it to the inner surface of ST as a lubricant.
Specified lubricant: Tire lube: Water = 1:3
2) Press the ST plunger until bushing flange protrudes beyond the trailing link.
ST 927730000 INSTALLER & REMOVER SET
3) Turn the trailing link upside down. Press the ST plunger in the direction opposite that outlines in the former procedure until bushing is correctly positioned in trailing link.
ST 927730000 INSTALLER & REMOVER SET
4) Install the housing.
INSPECTION
Check the trailing link for bending, corrosion or damage.