Upper Inner Trim

UPPER INNER TRIM

REMOVAL

1. Remove cap (A) on the upper side of the pillar trim, and remove the bolt inside.
2. Remove the front pillar upper trim.






3. Remove the front inside scuff plate, rear inside scuff plate and center pillar lower trim.
4. Loosen the shoulder anchor bolt (B), and then detach the shoulder anchor from center pillar.

5. Remove cap (A) on the upper side of the pillar trim, and remove the bolt inside.
6. Remove weather strip (B).
7. Pull on the upper trim clip section of the center pillar together with the lower trim, to remove.

8. Spread the lower trim outwards to remove the claw, and pull on the upper trim to remove.

INSTALLATION

Install in the reverse order of removal.

Tightening torque 7.5 N.m (0.76 kgf-m, 5.5 ft-lb)