Rear Seat
REAR SEATRear Seat:
REMOVAL
CAUTION: Vehicles equipped with side airbag and curtain airbag have the satellite safing sensor of the airbag system under the center of rear seat cushion. Before removing the rear seat, be sure to read the notes in the AB section.
1. Remove the three hooks while lifting up the rear seat cushion.
2. Remove the hook (A) by pushing it back while lifting the front side of the seat cushion, and remove the seat cushion.
3. Remove the headrest, and then tilt the backrest forward.
4. Remove the luggage floor mat.
5. Turn over the seat cover to remove the bolt.
6. Remove the backrest from the hinge assembly LH (hinge assembly RH).
NOTE: The backrest cannot be detached while the hinge assembly side and the backrest pin are not aligned.
INSTALLATION
Install in the reverse order of removal.
Tightening torque: Refer to "COMPONENT" of "General Description".