Blower Motor Unit Assembly
Blower Motor Unit AssemblyREMOVAL
1. Disconnect the battery ground cable from the battery.
2. Remove the instrument panel lower cover.
3. Remove the protect cover of ECM.
4. Disconnect the connectors of the intake door actuator and blower motor.
5. Remove the relay holder.
6. Loosen the bolt and nut to remove blower motor unit assembly.
INSTALLATION
Install in the reverse order of removal.
Tightening torque: N.m (kgf-m, ft-lb)
Heater Cooling Unit
T1: 5.0 (0.5, 3.7)
T2: 6.68 (0.7, 4.9)
T3: 7.5 (0.76, 5.5)
Blower Motor Unit
T: 7.5 (0.76, 5.5)