Symptom Related Diagnostic Procedures
1. SYMPTOM CHARTSymptom Chart:
CAUTION: When measuring the voltage and resistance of each control module or sensor, use a tapered pin with a diameter of less than 0.64 mm (0.025 in) in order to avoid poor contact. Do not insert the pin more than 2 mm (0.08 in).
2. CHECK POWER SUPPLY AND GROUND CIRCUIT
Step 1-3:
3. CHECK ABS CONTROL MODULE OR VDC CONTROL MODULE.
Step 1-2:
4. CHECK ENGINE CONTROL MODULE (ECM)
Step 1-2:
5. CHECK FUEL LEVEL SENSOR.
Step 1-3:
Step 4-7:
6. CHECK ENGINE COOLANT TEMPERATURE SENSOR
Step 1-2:
