Removal

Steel Wheel

REMOVAL
1) Apply the parking brake, and position select lever or shift lever to "P" range (AT model) or "1st gear' (MT model).
2) Set the shop jacks or a lift to the specified points, and support the vehicle with its wheels slightly contacting the floor.
3) Loosen the wheel nuts.
4) Raise the vehicle until its tires are off the ground using the jack or a lift.
5) Remove the wheel nuts and wheels.

NOTE:
^ When removing the wheels, be careful not to damage the hub bolts.
^ Place the wheels with their outer sides facing upward to prevent wheels from being damaged.