Crankshaft Main Bearing

Main bearing
#1, #3
Standard 1.99 8-2.011 mm (0.0787 - 0.0792 in)
0.03 (0.0012) US 2.017 - 2.020 mm (0.0794 - 0.0795 in)
0.05 (0.0020) US 2.027 - 2.030 mm (0.0798 - 0.0799 in)
0.25 (0.0098) US 2.127 - 2.130 mm (0.0837 - 0.0839 in)
#2, #4, #5
Standard 2.000 - 2.013 mm (0.0787 - 0.0793 in)
0.03 (0.0012) US 2.019 - 2.022 mm (0.0795 - 0.0796 in)
0.05 (0.0020) US 2.029 - 2.032 mm (0.0799 - 0.0800 in)
0.25 (0.0098) US 2.129 - 2.132 mm (0.0838 - 0.0839 in)

Case half bolts
Tighten the 10 mm cylinder block connecting bolts on the LH side (A - D) in alphabetical order.





Tighten the 10 mm cylinder block connecting bolts on the RH side (E - J) in alphabetical order.





Tighten the LH side cylinder block connecting bolts (A - D) further in alphabetical order.





Tighten the RH side cylinder block connecting bolts (E - J) further in alphabetical order.





Tighten the LH side cylinder block connecting bolts (A - D) further in alphabetical order.
-(A), (C): Angle tightening





Tighten the RH side cylinder block connecting bolts (E - J) in alphabetical order.





Tighten the 8 mm and 6 mm cylinder block connecting bolts on LH side (A - H) in alphabetical sequence.