Operation CHARM: Car repair manuals for everyone.
Home >> Subaru >> 2008 >> Impreza WRX F4-2.5L DOHC Turbo >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Testing and Inspection >> Scan Tool Testing and Procedures >> Compulsory Valve Operation Check Mode

Compulsory Valve Operation Check Mode

Compulsory Valve Operation Check Mode

OPERATION
1. Prepare the Subaru Select Monitor kit.






2. Prepare the personal computer which has been installed the Subaru Select Monitor.
3. Connect the USB cable between SDI (Subaru Diagnosis Interface) and USB port on the personal computer (dedicated port for the Subaru Select Monitor).

NOTE: The dedicated port for the Subaru Select Monitor means the USB port which was used to install the Subaru Select Monitor.

4. Connect the diagnosis cable to the SDI.
5. Connect the delivery (test) mode connector (A) located under the glove box.






6. Connect the SDI to data link connector located in the lower portion of the instrument panel (on the driver's side).






CAUTION: Do not connect the scan tools except for Subaru Select Monitor and general scan tool.

7. Start up the personal computer.
8. Turn the ignition switch to ON (engine OFF), and run the "PC application for Subaru Select Monitor".
9. On the <
> display screen, select the {Each System Check}.
10. On the <> display screen, select the {Engine Control System}.
11. Click the [OK] button after the information of engine type has been displayed.
12. On the <> display screen, select the {System Operation Check Mode}.
13. On the <> display screen, select the {Actuator ON/OFF Operation}.
14. Select the desired compulsory actuator on the <> display screen and click the [Next] button.
15. Clicking the [Finished] button completes the compulsory valve operation check mode. The display will then return to the <> screen.
- A list of the support data is shown in the following table.






NOTE: The following parts will be displayed but not functional.






- For detailed operation procedure, refer to the "PC application help for Subaru Select Monitor".
pro multis · About Operation CHARM