> display screen, select the {Each System Check}.
9. On the <> display screen, select the {Engine Control System}.
10. Click the [OK] button after the information of engine type has been displayed.
11. On the <> display screen, select the {System Operation Check Mode}.
12. The following items will be displayed on screen.

1. FUEL PUMP CONTROL (OFF DRIVE)

CAUTION: After executing the operation check mode, execute the Clear Memory Mode Clear Memory Mode

1) On the <> display, select the {Fuel Pump Control}.
2) On the <<Fuel Pump Control>> display screen, select the {OFF Operation}.
3) On the <> display screen, start the engine and click the [OK] button.
4) Click the [Cancel] button to end the OFF drive. The screen will return to the <<Fuel Pump Control>> screen.

NOTE: For detailed operation procedure, refer to the <>.

2. FUEL PUMP CONTROL (ON/OFF DRIVE)

CAUTION: After executing the operation check mode, execute the Clear Memory Mode Clear Memory Mode

1) On the <> display, select the {Fuel Pump Control}.
2) On the <<Fuel Pump Control>> display screen, select the {ON/OFF Operation}.
3) On the <Ignition Switch ON with Engine Stalled>> display screen, turn the ignition switch to ON and click the [OK] button.
4) Click the [Cancel] button to end the ON/OFF drive. The screen will return to the <<Fuel Pump Control>> screen.

NOTE: For detailed operation procedure, refer to the <>.

3. IDLING IGNITION TIMING FIXED

CAUTION: After executing the operation check mode, execute the Clear Memory Mode Clear Memory Mode

1. On the <> display screen, select the {Fixed Idle Ignition Timing}.
2. On the<> display screen, start the engine and click the [OK] button.
3. Click the [Cancel] button to end the idle ignition timing fixed. The screen will return to the <> screen.

NOTE: For detailed operation procedure, refer to the <>.

4. IDLE SPEED CONTROL

CAUTION: After executing the operation check mode, execute the Clear Memory Mode Clear Memory Mode

1. On the <> display screen, select the {Idle Speed Control}.
2. On the <> display screen, start the engine and click the [OK] button.
3. In the <> screen, click the [/\] button or the [\/] button to change the setting values, then click the [OK] button. Setting is possible in a range between 500 rpm - 2,000 rpm, in increments of 50 rpm. However, the engine speed that can actually be controlled will vary depending on the vehicle.
4. Click the [Cancel] button to end the idle speed control. The screen will return to the <> screen.

NOTE: For detailed operation procedure, refer to the <>.

5. INJECTOR CONTROL. (INJECTION STOP MODE)

CAUTION: After executing the operation check mode, execute the Clear Memory Mode Clear Memory Mode

1. On the <> display, select the {Injector Control}.
2. On the <> display screen, select the {Injection Stop Mode}.
3. Select the desired injector number on the <> screen, and click the [OK] button.
4. On the <> display screen, start the engine and click the [OK] button.
5. Click the [Cancel] button to return the <> display screen.
6. On the <> display screen, click the [Return] button to end the <>. The screen will return to the <> screen.

NOTE: For detailed operation procedure, refer to the <>.

6. INJECTOR CONTROL. (INJECTION QUANTITY CONTROL)

CAUTION: After executing the operation check mode, execute the Clear Memory Mode Clear Memory Mode

1. On the <> display, select the {Injector Control}.
2. On the <> display screen, select the {Injection Quantity Control}.
3. On the <> display screen, start the engine and click the [OK] button.
4. In the <> screen, click the [/\] button or the [\/] button to change the setting values, then click the [OK] button. Setting is possible in a range between 0 - 20%, in increments of 1%.
5. Click the [Cancel] button to end the injection quantity control. The screen will return to the <> screen.

NOTE: For detailed operation procedure, refer to the <>.