Fuel Pump Control Unit: Service and Repair
Fuel Pump Control UnitREMOVAL
1. Disconnect the ground cable from battery.
2. Remove the rear quarter trim of the left side. (Wagon model)
3. Remove the left side trunk side trim. (Sedan model)
4. Remove the fuel pump control unit.
- Wagon model
- Sedan model
5. Disconnect the connector from fuel pump control unit.
INSTALLATION
Install in the reverse order of removal.
Tightening torque: 5 N.m (0.5 kgf.m, 3.7 ft.lb)