Vehicle Speed Sensitive Intermittent Wipers (From '06MY)

Vehicle Speed Sensitive Intermittent Wipers (From '06MY)

GENERAL




When the intermittent wiper is selected, the intermittent stop time is adjusted according to the vehicle speed to effectively secure visibility.
The control module built into the wiper switch assembly controls the intermittent stop time according to the vehicle speed signal provided from the body integrated unit.




The intermittent stop time will change according to the selected position of the intermittent volume switch.

NOTE:
- The intermittent stop time in relation to vehicle speed is as shown in the figure, but this may differ from the actual speed.
- Only 5 levels are shown here, but in actual use, it will operate at all positions of the intermittent volume switch.