Keyless Entry: Testing and Inspection
INSPECTION1. SYMPTOM CHART
Symptom Chart:
2. CHECK KEYLESS TRANSMITTER BATTERY AND FUNCTION
Step 1-4:
CAUTION: Be sure to reset keyless transmitters from other vehicles that were registered to the inspection target vehicle, and the vehicle to which keyless transmitters were registered for the inspection, to the condition before performing the inspection. (Register the keyless transmitters again.)
3. CHECK KEYLESS ENTRY CONTROL MODULE
Step 1-4:
4. CHECK BODY INTEGRATED UNIT POWER SUPPLY AND GROUND CIRCUIT
Step 1-2:
5. CHECK DOOR SWITCH
Step 1-4:
Step 5:
6. CHECK KEY WARNING SWITCH
Step 1-6:
7. CHECK ROOM LIGHT OPERATION
Step 1-2:
8. CHECK HAZARD LIGHT OPERATION
Step 1-3:
9. CHECK KEYLESS BUZZER
Step 1-5:
10. CHECK DOOR LOCK SWITCH
Refer to the door lock switch inspection of the door lock control system. Testing and Inspection
11. CHECK IGNITION SWITCH ILLUMINATION
Step 1-3:
