Radiator Main Fan and Fan Motor

RADIATOR AND RADIATOR FAN








Radiator Main Fan and Fan Motor

REMOVAL

1) Set the vehicle on a lift.
2) Disconnect the ground cable from the battery.





3) Lift up the vehicle.
4) Remove the under cover.
5) Disconnect the main fan motor connector (A).





6) Lower the vehicle.
7) Remove the air intake duct.
8) Remove the reservoir tank.
9) Remove the mounting bolts from radiator main fan motor assembly and over flow pipe.





10) Remove the radiator main fan motor assembly by lifting it up and out from the vehicle.

INSTALLATION

Install in the reverse order of removal.

NOTE: Check that the radiator hose and over flow hose are connected properly.

Tightening torque: 7.5 Nm (0.8 kgf-m, 5.5 ft. lbs.)





DISASSEMBLY

1) Remove the clip holding the main fan motor connector on the radiator main fan shroud.
2) Remove the nuts holding the radiator main fan to the main fan motor.





3) Remove the bolts holding the main fan motor onto the radiator main fan shroud.





ASSEMBLY

Assemble in the reverse order of disassembly.
Tightening torque: 4.41 Nm (0.45 kgf-m, 3.25 ft. lbs.)





Tightening torque: 3.4 Nm (0.3 kgf-m, 2.5 ft. lbs.)