Operation CHARM: Car repair manuals for everyone.

Air Cleaner Housing: Service and Repair

Air Cleaner Case

REMOVAL
1. Disconnect the ground cable from the battery.






2. Remove the air intake duct.
3. Disconnect the connector (A) from mass air flow and intake air temperature sensor.
4. Loosen the clamp (B) which connects the air intake boot and intake duct.
5. Remove the clip (C) from the air cleaner case.






6. Remove the air cleaner case (rear) and air intake boot.
7. Remove the air cleaner element.
8. Remove the bolts (A) and nuts (B) which secure the air cleaner case (front) to the body.






9. Remove the air cleaner case (front).

INSTALLATION
Install in the reverse order of removal.

NOTE: When installing the air cleaner case (rear), align the protrusion of the air cleaner case (rear) to the hole on the air cleaner case (front) to install.