Driver's Control Center Differential (DCCD) Manual Mode Display

Driver's Control Center Differential (DCCD) Manual Mode Display
OPERATION
When there is a problem with a part or module, DCCD manual mode display blinks. (DCCD manual mode display blinks even in AUTO mode condition.) Until the problem is detected and the ignition switch is turned OFF, the blinking continues. The faulty parts can be recognized by reading the DTC through the Subaru Select Monitor.
DCCD manual mode display is as shown in the figure.





INSPECTION

DIAGNOSIS
DCCD manual mode display is open or shorted.

TROUBLE SYMPTOM
DCCD manual mode display does not illuminate in manual mode.

WIRING DIAGRAM:

Step 1-Step 9: