Cylinder Head Assembly: Specifications

Surface warpage limit 0.035 mm (0.0014 in)

Tightening Torque
Tighten all bolts to 29 N-m (3.0 kgf-m, 21.4 ft-lb) in alphabetical order.
Tighten all bolts to 69 N-m (7.0 kgf-m, 50.9 ft-lb) in alphabetical order.
Loosen all the bolts by 180° in the reverse order of installing, and loosen them further by 180°.
Tighten all bolts to 49 N-m (5.0 kgf-m, 36.1 ft-lb) in alphabetical order.
Tighten all bolts by 80 to 90° in alphabetical order.
Tighten all bolts by 40 to 45° in alphabetical order.

CAUTION: Do not tighten the bolts 45°.

Further tighten the bolts (A) and (B) by 40 to 45°.

CAUTION: Make sure the total "re-tightening angle" does not exceed 90°.





Camshaft bearing caps





Cam Sprocket
Tightening torque 30 N-m (3.1 kgf-m, 22.1 ft lb)
Tighten further 45°.