Tailgate Latch: Service and Repair

Rear Gate Latch Assembly

REMOVAL
1. Disconnect the ground cable from the battery.
2. Remove the rear gate trim.
3. Remove the two screws.






4. Disconnect connectors and cables of the rear gate handle.






5. Remove the rear gate latch assembly.

INSTALLATION
Install in the reverse order of removal.

TRUNK LID AND REAR GATE LOCK

Tightening torque: N.m (kgf.m, ft.lb)

T1: 7.5 (0.76, 5.5)

T2:18 (1.8, 13.3)

T3: 25 (2.5, 18.4)

NOTE: Make sure the lock works correctly after installation.