Cylinder Head Assembly: Specifications
Cylinder headSurface warpage limit 0.035 mm (0.0014 in)
Tightening Torque
Tighten all bolts to 29 N-m (3.0 kgf-m, 21.4 ft-lb) in alphabetical order.
Tighten all bolts to 69 N-m (7.0 kgf-m, 50.9 ft-lb) in alphabetical order.
Loosen all the bolts by 180° in the reverse order of installing, and loosen them further by 180°.
Tighten all bolts to 42 N-m (4.3 kgf-m, 31.0 ft-lb) in alphabetical order.
Tighten all bolts by 80 to 90° in alphabetical order.
Tighten all bolts by 40 to 45° in alphabetical order.
CAUTION: The tightening angle of the bolt should not exceed 45°.
Further tighten the bolts (a) and (b) by 40 - 45°.
CAUTION: Make sure the total "re-tightening angle" does not exceed 90°.
Camshaft bearing caps
Cam Sprocket
Tightening torque 78 N-m (8.0 kgf-m, 57.5 ft-lb)