Center Mounted Brake Lamp: Service and Repair

High-mounted Stop Light

REMOVAL
1. SEDAN MODEL
1. Disconnect the ground cable from battery.
2. Push the high-mounted stop light towards the rear of the vehicle (1), raise the rear end (2) and remove the clips to remove the stop light.






3. Remove the harness from the clamp.






4. Disengage two claws (A), pull out the high-minded stop light from the cover and remove claw (B).






5. Disengage the three claws and remove lens (A).






6. Remove the bulb.

2. WAGON MODEL
1. Disconnect the ground cable from battery.
2. Remove the roof spoiler.
3. Remove the nuts (A), then detach the high-mounted stop light.






INSTALLATION
Install in the reverse order of removal.