Center Mounted Brake Lamp: Testing and Inspection

INSPECTION
1. SEDAN MODEL
1. Visually check the bulb for blow out.
2. Check the bulb specification.
3. If NG, replace the bulb with a new part.

2. WAGON MODEL
1. Install the high-mounted stop light to test if it illuminates normally.
2. If the high-mounted stop light does not illuminate, replace it with a new part.

NOTE: Since LED (Light Emitting Diodes) is used for the high-mounted stop light of the wagon model, replace the high-mounted stop light as an assembly when the LED burns out.