Fog/Driving Lamp: Adjustments
ADJUSTMENT1. FOG LIGHT AIMING
NOTE: Before checking the fog light beam level, be sure of the following:
- The area around the fog light has not sustained any accident, damage or other type of deformation.
- Vehicle is parked on a level surface.
- The inflation pressure of tires is correct.
- Vehicle's fuel tank is fully filled.
1. Bounce the vehicle several times to normalize the suspension.
2. Make certain that someone is seated in the driver's seat.
3. Measure the height of the center of fog light.
4. Loosen the screws and clips of the mud guard, and then turn over the front mud guard.
5. Adjust the fog light pattern by inserting a Phillips screwdriver to the aiming screw hole.
- Except for OUTBACK model
- OUTBACK model