Remote Openers

Remote Openers

REMOVAL

1. FRONT HOOD OPENER
1. Remove the cable from the front hood lock.
2. Remove the bolt, and then detach the opener lever.






2. TRUNK LID OPENER
1. Remove the rear seat.
2. Remove the center pillar lower trim, side sill cover, rear pillar lower trim and floor mat on the driver's side. Remove the clip holding the cable.
3. Remove the opener lever (1) and rear cover (2).
4. Remove the pin (3) and remove front cover (4).
5. Remove the bolt and nut, and remove the pull handle assembly (5).






6. Remove the cable from the pull handle assembly (5).
7. Remove clamp (7) to remove the key cylinder (8).

CAUTION: Remove the key cylinder in the UNLOCK position.

8. Remove the trunk lid lock assembly from the trunk lid.
9. Remove the cable from the trunk lid lock assembly.






3. FUEL FILLER FLAP LID OPENER

Sedan model
Check the trunk lid opener.

Wagon model
1. Remove the rear seat.
2. Remove the center pillar lower trim, side sill cover, rear pillar lower trim and floor mat on the driver's side. Remove the clip holding the cable.
3. Remove the bolt and nut, and then detach the pull handle assembly.






4. Remove the cable from pull handle assembly.
5. Remove the rear quarter trim RH.
6. Rotate the fuel lock inside the quarter panel to 90° and remove. (Either right or left turn)






INSTALLATION
Install in the reverse order of removal.

CAUTION: Install the key cylinder to the trunk lid in the UNLOCK position.