Engine Oil: Service and Repair
REPLACEMENT1) Set the vehicle on a lift.
2) Open the engine oil filler cap for quick draining of engine oil.
3) Lift up the vehicle.
4) Drain engine oil by loosening the engine oil drain plug.
NOTE: Prepare the container for draining of engine oil.
5) Tighten the engine oil drain plug after draining engine oil.
NOTE: Use a new drain plug gasket.
Tightening torque: 44 N-m (4.5 kgf-m, 32.5 ft-lb)
6) Lower the vehicle.
7) Using engine oil of proper quality and viscosity, fill engine oil through the oil filler duct to the "F" line on level gauge. Make sure that the vehicle is parked on a level surface when checking oil level.
Recommended oil: Refer to "SPECIFICATION" for the recommended oil.
Engine oil capacity: Refer to "SPECIFICATION" for the engine oil capacity.
8) Close the engine oil filler cap.
9) Start the engine and circulate the engine oil.
10) After the engine stops, recheck the oil level. If necessary, add engine oil up to the "F" line on level gauge.
