Curtain Airbag Sensor
Curtain Airbag SensorREMOVAL
1. Turn the ignition switch to OFF.
2. Disconnect the ground cable from battery and wait for at least 20 seconds before starting work.
3. Remove the rear seat.
4. Remove the nuts to remove the curtain airbag sensor.
5. Disconnect the airbag connector.
INSTALLATION
CAUTION:
- Do not reuse the bolt and nut.
- Always use new bolts and nuts for them.
Install in the reverse order of removal.
Tightening torque: 8.0 N.m (0.82 kgf.m, 5.9 ft.lb)