Shift Linkage: Service and Repair

Paddle Shift Assembly

REMOVAL
1) Disconnect the ground cable from the battery.
2) Set the tire to the straight-ahead position.
3) Remove the airbag module.

WARNING: If there are airbag modules mounted, always refer to "Airbag System" when performing airbag module service.

4) Remove the steering wheel.
5) Remove the column cover.
6) Disconnect the connector of paddle shift assembly.





7) Remove the paddle shift assembly.





INSTALLATION
1) Clean all parts before installation.
2) Install in the reverse order of removal.
3) After completing installation, shift the select lever to the manual mode.
4) Operate the paddle shift assembly and confirm that "2" illuminates on the combination meter.

INSPECTION